USE DISCOUNT CODE FREEDOM FOR NO TAXES + FREE SHIPPING TODAY **FREE SHIPPING DOES NOT APPLY TO ALUMINESS BUMPERS AND ROOF RACKS**

VMAX SLR100 12Volt 100AH Deep Cycle AGM Solar Battery
VMAX SLR100 12Volt 100AH Deep Cycle AGM Solar Battery

VMAX SLR100 12Volt 100AH Deep Cycle AGM Solar Battery

  • Vendor
    VMAX
    Sale price
    $275.00
    Regular price
    $300.00 You save 8%
    Unit price
    per 

    Availability:

    Free Shipping & No Taxes

    VMAX SLR100 12Volt 100AH Deep Cycle AGM Solar Battery

    This is a  rechargeable 85ah AGM battery designed for use with PV (photo voltaic) solar panels, smart chargers, wind turbines, and inverters.

     Pair it with the Samlex Dual Battery Monitor or Xantrex Battery Monitor.

    Specifications

    • Nominal Voltage:  12V
    • 20-Hr Capacity: 100AH
    • RC (min): 220
    • Energy (kWH):  1.350
    • Terminal Posts  8mm (included) 
    • Dimensions: 12.1"w x 6.7"d x 8.2"h  (8.5" terminal height) 
    • Weight: 68lb
    • Charging Current*: 7A-30A
    • Charging Voltage: 14.4-14.9V
    • Float Voltage: 13.5V-13.8V

    Recommended Charging Options

    • AC Chargers: Any Quality Brand AGM- Smart & Microprocessor controlled- charger with the recommended specs above can be used.
    • Vehicle Alternator: 14V-15V
    • RV Converter: 14V-15V
    • Solar Panel: 150W-400W (100W may be used if Depth of Discharge would not exceed 50%)
    • Wind Turbine: 150W - 400W
    • Charge Controller: 20A-UP

    * Warning: Do not use a charger with smaller amperage than the recommended Charging Current shown above.
                      Maintainers should ONLY be used to maintain a fully charged battery but NEVER as a charger.

    ** th: Total Height Including Terminal.

    Operating Temperature Range

    • Discharge: -4~140F
    • Charge:     14~140F
    • Storage:     -4~140F
    Temperature Compensation
    • Cycle use:     -30mV/C
    • Standby use: -20mV/C

    UPC: 729440725020

    BCI Group Codes*

    Matching Termination:  24 (+ on L.H.S. & - on R.H.S)

    * Matching is based on closest dimensional specifications. Differences in hold downs and termination may require some accommodations and/or the extension of one or both vehicle's battery cables.